Recent content by Mick

Found a pic of Davo at Checkpoint 1 Mick

Thanks!!

It worked for a while with no password. I was just talking to Joe a minute ago. I had to disconnect and when I went back it asked for a password. :( Mick

Jestal, Thanks for an EXCELLENT description of the problem! I've been involved with large system processors for 30 years and your explanation of how fast the CPU can read/adjust the FI tables is right on. I too wondered if they moved the BARO sensor 'inside' the ECU housing (just like BMW...

Al, Your comments are 100% right on!! :(

According to Matt Parkhouse, Chris's drive line failure is the Transmission and not the final drive. He's at our shop in Colorado Springs.? It's the gearbox - a diagnostic oil drain got a LOT of metallic debris.... We're looking at options now.... Matt Parkhouse

Frank, At this point I'd probably disassemble the right switch gear assembly and look for a broken or shorted wire. Does it quit like you flipped the kill switch off? Those contacts CAN get dirty.

Del, I think you are correct in most of your assumptions but I hope Yamaha isn't working on a solution for a minor surge problem. This (when it happens) is an almost total loss of throttle control. I also believe it is an overly RICH condition and not a lean condition. Most riders who have...

You are correct Gary. I was mistaking that part as a modulator for the vacuum signal. Mick

JC, I agree, they 'may' have to add some of the removed hardware to get the bike to perform properly in changing altitudes. Mick

Does anyone who is having the problem have some kind of video recorder? Maybe set up some kind of helmet cam so the video can show that no funny business is happening with the throttle while the bike is surging. That would be at least one bit of video proof that it is happening. I have an 07...

Don't call me Honey. Mick

Chris M. Since you are the service manager here: https://www.adventuremotorsports.net/default.asp I sincerely hope you are not trying to say a Throttle Body Sync is the answer to this Altitude problem. When the problem actually surfaces, the bike is almost unrideable. My riding buddy could...

Al, I 'think' what you have found (assuming you can reproduce the failure reliably) is the 'bug' in their ECU program. Maintaining High manifold Vacuum (or low pressure as you described it :) ) 'could' overwhelm the programming that is watching the MAP and trying to convert it to Barometric...

+1 :rolleyes: