Help Support Yamaha FJR Motorcycle Forum:
Warchild
- Messages
- 5,137
- Reaction score
- 1,024
Latest activity Postings About Post areas
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.Yes sir, that is correct. For me, the 67mm opening just said no. 🥺 But then, Mr "Sausage Fingers" Ernie Azevedo gets 2-3 of his... -
Warchild replied to the thread Long-Distance Endurance MT10 Project.The Final Connection: with aux cell black fitting coming up from below: Routing the fuel line with gentle 'S' curves assures the...
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.Tank almost ready for install and testing. Best to have the female Quick Disconnect on the tank-side, allows easy removal of stock tank...
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.Vent line exit - aft of the rear tire. I never expect to have an overflow situation, but one never knows... and if it does happen, fuel...
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.Initial inspections of the opening made by removing the fuel pump suggested that there is no possible way to get a hand in there to work...
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.No, overflow bottles not required by the IBA. All of my venting is done internally, yes. It's a much cleaner arrangement, it avoids all...
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.Big day this upcoming Friday: the brazing job on the MT10's fuel tank. So I really need to wrap up the plumbing job for the aux cell. I...
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.Slight setback. Getting ready for the crucial drilling for bulkhead fitting, but with only a 67mm diameter opening from fuel pump...
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.Dropped 2 teeth in the rear, gives almost 500 RPMs savings at speed. Side advantage: I have increased my wheelbase by a solid 11mm...
-
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.While I ordered and have the duel outlet metal stems. I am not using them. That could be had cheap from me, for those that are...
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.These are cap sensors. I stopped looking at internals sensors because eventually, they will get ruined during a tire-changing exercise...
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.It is quite similar to other Chinese brands, I've seen the users manual for a couple of them - seems mostly all the same. The SYKiK...
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.With aux fuel. 4.5-gallon stock plus 4.3-gallon means the low Fuel Light is illuminating after 7.5 gallons - likely around at the...
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.It is a pinch louder than I anticipated it was going to be, but it is not "loud" loud by any means, certainly not to the point it's...
-
Warchild replied to the thread Long-Distance Endurance MT10 Project.Well.... some interesting, happy test news. 😃 Today was the first run-in of the Yoshimura Alpha-T 3/4 setup, along with proper size...
-
-
-
Loading…
-
Loading…
-
Loading…
