Search results

I love my AE for it's auto clutch/paddle shifter since I have arthritus bad in both hands. But after a BMW RT1150, it is top heavy. First tip-over just last month in my garage after repositioning the bike & the kick stand moved. The biggest fault is my front brake pads clunk over bumps, my...

Man, you guys !!?? Oh yea, it was Zombie Friday. Igniters, when I was mid-teens 50 years ago we just screwed a spark plug into the exhaust pipe past the muffler & wired it to a hot source switch. But once coasting down the LONG hill into Allegan, MI. in my dad's stick shift 6-cyl. '61 Chevy...

Gary-yes & yes. Stage 1 = 1/2 Trooper. Don't think I saw stage 1 in any posts, but then I didn't read all 400+ posts. Skooter - yes, I have OCD, am anal-retentive, and being a retired engineer sure contributes to the pi. I didn't look at what side (in or out) the baffle weld is, but if you do...

After reading numerous pros & a few cons (1 pipe-to-baffle weld eliminated) of this easy farkle, I decided to do it a bit differently. Assuming a 1.5" dia hole saw using a 1/16"-.06" thick blade, I calculated the area of the cut-out circle (A = pi x D/2 squared). The dif ='s approx 0.3 sq...

I changed my rear pads after 500 miles on my '08 to organics. Several other forum posters had suggeted that, and it worked. Not the greatest braking, but better than stock!!

I don't normally hard throttle shift my '08 AE, me being an old geezer. I have not adjusted anything, and except for 1st to 2nd, my AE is always buttery smooth up & down. I do NOT flick the throttle! Doing so makes for very rough shifts. I read all your advices above and retried flicking...

A slightly dif battery topic, but why did my speedo & tach do their needle sweep to & fro without the battery being connected ?? I don't recall which cable I took off, (the one in front ((positive?)), but it was in my hand and all sorts of wierd things happened. Maybe I was grounded to the...

Read the New Rifle thread 4 below this one. I love my Rifle. It is BIG, but it works !! I got the +3" tall, +4" wide per both the Rifle & CE Bailey sizing spec sheets. Had a CEB shield on my '04 BMW RT and didn't like it, too much noise and light reflections.

Sorry IObeam, look at the top pic. Our shfiter mounting is behind the footpeg plate, and the hardest bolt to remove is the one behind the toe shifter holes, which don't align with the bolt head.

I wasn't very clear on my request. I got the shifter/rubber part off just like you stated (great pic1), but I did that along time ago. I want to remove the metal angled shifter lever that has the 3 shifter adjustments holes in it between your 2 spanners, the part that disappears into the footpeg...

Has anyone taken off the shifter pedal? If so, how did you get the screw that is behind the rubber pad out?

Cool hand guards!! Where did U get them ??

I tried like hell NOT to remove the top triple tree, even using a small bolt cutter get get rid if the wire holder. While I got it cut off, the cut was very sharp which bothered me. Best to remove the tree!! 36mm 6 point from Sears.

My AE clutch disengages around 1500 rpm, so there is NO reason not to downshift into the proper gear before a stop, before the wheels stop turning which assists in the downshift.

Go to your local Ace Hardware or ??, much cheaper !! Some buy 100 or more (bulk) at 1 time on-line for a good price.

Push the center pin in SLOWLY, WHILE pulling up on the rest of the fastener. Yamma uses at least 3 dif typs of plastic pins, if U push the pin in too far, it may drop into neverland. I left the side battery cover off altogether, less work on those stupid pins.

I recall having this problem with ANY bike !! Don't stop in 3rd gear. That's why Yamma put the shift indicator blinker there.

I previously posted my whistle/chirp, with the stock shield & my new Rifle. It was the "W" thingee attached to the windscreen. Made a 1/16" pressure senstive foam gasket for it (plus siliconed all the holes) no more noise !!

and your kick stand is UP !! ??

How can U organize that thing, there are no dividers in it ? OCD since 1962 !! But I have has therapy. And mankind is still alive because of that.