Search results

With Sena this may be different. With Cardo, the changed their BT driver to only work with the Headset specification. I had an old Garmin with BT. It would not pair. I found discussions on other sites where it did, then Cardo changed their software, and no more. So it depends if Sena is...

I just used this setup this weekend. I never would have found that connection without this article. Thanks a bunch.

So I dropped my Rider and cracked the glass digitizer. I've looked on the web, I've found one place that sells them out of the UK. Has anyone had to replace this before? It looks like to do just the glass digitizer would need soldering. I can't do that sensitive a solder. For a little more...

I had a Digi on my R6. Plug and play, easy setup https://datatool.co.uk/home/products/DIGI

I have a Neotec, comfortable, ease to put in communication system, looks tons better then the Multitec. I'll never go back to a normal full face again.

I have small hands. I don't even bother with the thumb anymore. Just flick the "upshift" forward. It doesn't take much contact either.

Tyre is simple to use right out of the box.

Thanks for the reply. That sort of confirms what I was thinking, because the other side is pretty solid. I guess it's time to look up "taking the nose off" Martin

I have that also, my question is more flex at the screw on the stanchion. it allows the shelf to move fore and aft.

I have a Gen II with the N/Line Dash shelf. The shelf seams to have a lot of flex. The left side seams more so then the right. Does the top screw on the stanchions connect to anything other then plastic body work? Thanks Martin

I have the Scala G4, it only supports the headset protocol and the 765t only has A2DP. My understanding is that the Sena works with A2DP.

I use the Nolan TXPlus plugged into my Nuvi 765t. https://www.amazon.com/Nolan-Unversal-Bluetooth-Wireless-Transmitter/dp/B008FB9SWW/ref=pd_sim_sbs_e_4 You can find it several places on the internet. It works well, charges on a standard micro usb.

After it cures its water proof. Wash it, Wax it, whatever.

I have the Scala Rider G4 and I just run it along the side and up.

3M Paint Defender peals right off. Looks like plastic wrap. If it got into groves you may have to work at it a little.

The 765T only support A2DP, the Scala units will only support Headset Profile which is what the TXPlus does. If you have the another BT that only requires A2DP then you are ok.

I put the 3M Defender on my Boxster. The front slope of that nose was getting chipped bad. Worked great. Make sure you shake the can well, I think that may be why some people get a matte finish instead of a glossy one. There is no substitution for prep on this either. Clean, tapped off...

With the Nuvi 765T (or any other unit with a 3.5mm jack), you can use the Nolan TXPlus transmitter. https://www.amazon.com/Nolan-Unversal-Bluetooth-Wireless-Transmitter/dp/B008FB9SWW/ref=pd_sim_sbs_e_4/188-9026078-6240069 It works OK with my G4. The downside is you won't be able to use your...

Thanks for the info, hears to hoping I never need to use it.

I had the Vista Cruise on my ST1100. I could never get the thing adjusted so that it wouldn't slip when on or wouldn't grip when off. I just use the palm rest, works great.