Search results

After it sits do i crack it at the bleeder or master cylinder?

Ok so the rear disc is warped. I put in the old pads and rear pedal came back but my fronts are still soft i checked the rotors and they are straight. I did the reverse bleed with no results?

I have bleed them the old conventional way and with my mighty vac i spent two days and several big bottles of dot 4. I gave up and took it to the dealer and they bleed 3 times with the same results. fluid comes out clean and bubble free. Im at a loss on this one i feel as if i bought a bmw.

Im still thinking air in the system as well. And i checked the abs system doing a couple skids in the yard and it is functioning. Is there a a way to bleed the abs block? I cant see two lines or both masters to go bad at the same time. The only thing the fronts and rears have in common is the...

Ok guys i have new symptoms... over the weekend i rebuilt all calipers. I started the bleeding process and cannot get a firm pedal. I have no air coming out of the bleeders i even took it to the shop so they could bleed it. They bleed the lines and confirmed there was no air. So now what im left...

I will try the lever trick when i go to rebuild them and let you all know how it works.

Thankd for all help guys. It looks like i am rebuilding the calipers, i tried cleaning them with no luck. The pistons are really slow to push out and almost impossible to push in... my next question is is there a good place to pick up seal kits? I set up an order through cheap cycle parts only...

I bleed them in this fashion. (Sitting on bike) Left front Right front (top bleeder valve) Rear front (bottom bleeder valve) Then rear

Thank you BkerChuck i did a light cleaning of the caliper. I will remove them and do a deeper clean to see of that helps.

Ok ill make it easy for you. I installed all new brake pads. Since the install my front callipers are staying engaged. The rear brake pedal became spongy so i bleed both front and rear brakes. I checked the rear brake pedal and it's operation is smooth. Sorry If this reply is still not up to...

I have looked through the post and couldn't find anything on the issue i have an 06 fjr 1300a last week i put brand new tires on and realised the front pads were wore i ordered them rode for a week with no issues then i installed all new pads ever since my front brakes have been hanging real bad...