'03 Barbarian jumper mod

[WW'sFJR]

I'm not sure if this mod has been done already to my bike

and thought I should check the settings.

I could use a little more bottom end power.

Larry

WW's FJR

 

[Wolfhound]

https://www.fjrtech.com/getdbitem.cfm?item=6

 

[WW'sFJR]

https://www.fjrtech.com/getdbitem.cfm?item=6

Thanks FJRobert,

Found it ...............now it's to the tools.

Hope it works. Almost looks too easy.

I imagine these readings are going to vary considerably

between bikes/ regions.

Any known good settings that you are a ware of?

Example: Plus 4 -7 on the CO. I'm at sea level.

Larry

WW's FJR

 

[slapnpop]

If you don't know that it's already been done, you could actually be making things WORSE than before.

Write down all of the values before you begin, as they are specific to your bike, and can't simply be copied from someone's bike or settings.

I'm assuming you got it used, as otherwise you would know whether or not you had done it... If the original owner returned the wiring back to the stock configuration, you have no way of knowing whether or not the current values are the factory values, or already adjusted.

Time to break out the EGA.

 

[Afast03nNJ]

I could use a little more bottom end power.

That mod doesn't give you any more power. If your lookihg for more even, on demand power at just about any throttle position, get yourself a Power Commander. They make a huge differance in a very good way,