bigtallguy
Well-known member
So I finally got around to installing my cruise control (audiovox) and took it for a test ride. It worked ok at 60-70mph, dropping off by about 5mph initially, then back to where I set it and stayed.
Then the slow speed test had a lot of surging, constantly bouncing around the set speed of 35mph by 3-4mph. It settled for a few seconds then started hunting again so I cut it off. The rpms were at about 3-3500 rpm. I'm using one vacuum port and a vac canister from murphskits. The cable is routed as straight as I could get it, going from the right side below the seat, under the tank, then around and through the frame where the throttle cables and other stuff runs.
Any ideas why it's doing that? I did try to search but didn't find any threads with the answer. Thanks!
Then the slow speed test had a lot of surging, constantly bouncing around the set speed of 35mph by 3-4mph. It settled for a few seconds then started hunting again so I cut it off. The rpms were at about 3-3500 rpm. I'm using one vacuum port and a vac canister from murphskits. The cable is routed as straight as I could get it, going from the right side below the seat, under the tank, then around and through the frame where the throttle cables and other stuff runs.
Any ideas why it's doing that? I did try to search but didn't find any threads with the answer. Thanks!