Disc Rotor Mount Bolts

[Benjammer]

I must have some "Harley" in me because I'd like to replace the dull stock Disc Rotor Mount Bolts with ones that are Chrome Plated Steel. Chrome plated steel isn't quite as "bling" as pure chrome. Only thing I've been able to find are the expensive titanium bolts such as these listed on Ebay. Anyone know of a website that sells the Chrome Plated Steel ones??

https://www.ebay.com/itm/TITANIUM-DISC-ROTOR-MOUNT-SET-BOLTS-SCREWS-STAINLESS-YAMAHA-FJR1300-2000-2009-AS-/121084689030?pt=UK_Motorcycle_Parts&hash=item1c3135ba86#ht_391wt_1162

Thanks for your help.

 

[Chuck35]

My, they sure are pretty.

I suppose you could always send yours off for plating.

 

[ads245]

Pro Bolt sells Stainless Steel bolts, but they are even more expensive: https://www.probolt-usa.com/stainless-steel-disc-bolt-pack-x-18.html#.UcjMyT6gnOw

 

[Benjammer]

<blockquote class='ipsBlockquote'data-author="ads245" data-cid="1076231" data-time="1372114324"><p>

Pro Bolt sells Stainless Steel bolts, but they are even more expensive: <a href='https://www.probolt-usa.com/stainless-steel-disc-bolt-pack-x-18.html#.UcjMyT6gnOw'>https://www.probolt-usa.com/stainless-steel-disc-bolt-pack-x-18.html#.UcjMyT6gnOw</a></p></blockquote>

Appreciate the link. You're right....Expensive!

 

[lnewlf]

I'm guessing that the stock bolts are zinc plated-In any case, if you buff them with a cotton wheel and some compound they will look like chrome...and you don't have to go thru hell getting them out..wax or clear coat will keep them for a while..

 

[HotRodZilla]

If you remove them, you gotta replace them. You'd have to buy new ones and have those plated...Just a thought.

 

[Bike Effects]

I had Titanium bolts on my '03 FJR. Very hard to get a hold of but absolutely beautiful and light!