Spark Plug Wires

[Cibrd0wn]

Has anywone changed out the spark plug wires. Did you use the oem or aftermarket. I need to replace one of mine and was wondering if its worth it to just replace them all. I am also thinking it might be a job bigger than what I am confortable with. So how hard is it?

 

[wfooshee]

Wires are integral to the ignition coils, two per coil, siamesed. To replace plug wires you have to replace the coils.

Have you popped the plug cap off the wire? It goes back on easy. Just stuff the wire back in and turn the cap like your were screwing it on. Which is what it does.

 

[Constant Mesh]

The wires can be replaced on the coils according to Radman. They are twisted onto a threaded fitting in the coil similar to the plug cap on the other end. You can buy the correct diameter generic wire, cut it to length and attach it to the coil and plug cap.

I haven't done this but Radman said it's no problem.