TomInPA
Well-known member
I am looking for an economical answer to replace the 5-pin connector on a Givi E55 Admore Lighting Kit. The connectors used by Admore are pretty fragile and use thin male pins in a connector that goes through the case and connects to a keyed female connector that goes to the bike's lights, brake and turn signal connections. Well, over the years removing and putting this connector, I bent and broke the pins, so it is pretty useless. The kit sold by Admore is $50.
I'm sure I can find a substitute connector and make solder connections to the existing harness and save a few bucks (hey, I'm unemployed). Anyway, this 5 Kit 5-Pin for $15 is the closest I have found, but it won't attach nicely through the case. So I thought I'd prevail on the genius of this forum to maybe point me to a better connector and save me a few bucks.
Seriously, $50?...
I'm sure I can find a substitute connector and make solder connections to the existing harness and save a few bucks (hey, I'm unemployed). Anyway, this 5 Kit 5-Pin for $15 is the closest I have found, but it won't attach nicely through the case. So I thought I'd prevail on the genius of this forum to maybe point me to a better connector and save me a few bucks.
Seriously, $50?...