Roy Epperson
Well-known member
Patient - '07 A 75K miles, Factory harness recall replacement done 8K miles ago, Brodie's ignition key rely installed. My auxiliary power bus is on a separate circuit directly off battery and switched with relay activated by running lights
Problem - went for a short ride all "topic" light were working. Got home turned off bike, went into house, and came back out and turned on key and noticed no running lights, no turn signals or hazards. Brake and head lights work fine.
Checked ALL fuses in the fuse boxes by battery - all fuses are good.
Looked at Service Manual and talked with local dealer and don't see any other fuses between subject lights and fuses.
Any recommendations on what to look for and where to look?
I haven't lifted my relay tap on the running light lead to see if that might be the problem but that's only the running.
Hummmmm
TIA,
Roy
Problem - went for a short ride all "topic" light were working. Got home turned off bike, went into house, and came back out and turned on key and noticed no running lights, no turn signals or hazards. Brake and head lights work fine.
Checked ALL fuses in the fuse boxes by battery - all fuses are good.
Looked at Service Manual and talked with local dealer and don't see any other fuses between subject lights and fuses.
Any recommendations on what to look for and where to look?
I haven't lifted my relay tap on the running light lead to see if that might be the problem but that's only the running.
Hummmmm
TIA,
Roy