GARMIN 60csx Mount

[Jpeck]

I have a new Garmin 60cxs and would like to mount it on my 07 FJR. Given the lack of exposed handle bar real estate, I'm thinking a standard handlebar mount will not do. It would seem this RAM mount would do: https://products.ram-mount.com/rammount/pro...RAM-B-174-GA12U

Anybody out there mounted there 60csx? (on your FJR!).

Thanks - James

 

[ShawnKing]

Anybody out there mounted there 60csx? (on your FJR!).

I've used that exact same mount with a Garmin Zumo 550 and a TomTom Rider 2. Both worked just fine. I'm going to relocate them eventually but for the time being, it works.

 

[jerryv]

Anybody out there mounted there 60csx? (on your FJR!).

I've used that exact same mount with a Garmin Zumo 550 and a TomTom Rider 2. Both worked just fine. I'm going to relocate them eventually but for the time being, it works.

RAM-B-252U

RAM .87 X 2.25 W/ 11 MM HOLE & 1"ball

i used this with 10mm bolt in threaded hole on left bar. on my o6 .

 

[jgrover]

I use the ball base that attaches to the the top of the clutch reservoir - same concept.. works great...

Jason

 

[LgFJR]

I have a new Garmin 60cxs and would like to mount it on my 07 FJR. Given the lack of exposed handle bar real estate, I'm thinking a standard handlebar mount will not do. It would seem this RAM mount would do: https://products.ram-mount.com/rammount/pro...RAM-B-174-GA12U
Anybody out there mounted there 60csx? (on your FJR!).

Thanks - James

I use this ball mount with a short arm for my Magellan and Ique on the FJR.......mine is attached to the bar riser bolt........works super.........

https://products.ram-mount.com/rammount/pro...mber=RAM-B-252U

 

[crankshaft]

Will this mount work on the left handle bar?

https://products.ram-mount.com/rammount/pro...umber=RAM-B-231

Or is the clutch mount better?

https://products.ram-mount.com/rammount/pro...mber=RAM-B-346U

 

[rfulcher]

This is what I use.

https://www.ram-mount.com/mount/victory_vision_mount.htm

There was initially a problem with stocking of the metric threaded RAM ball but I think they are in stock now.

I have also used a threaded stem nut with a RAM ball.

 

[jgrover]

I used that clutch mount for a while and don't like it... those 2 little screws aren't meant to support any weight and pushing on the GPS to push buttons, I felt like I was just asking for trouble. I switched to a mount on the bars (it came with my Zumo 550).

Jason

Will this mount work on the left handle bar?
https://products.ram-mount.com/rammount/pro...umber=RAM-B-231

Or is the clutch mount better?

https://products.ram-mount.com/rammount/pro...mber=RAM-B-346U

 

[crankshaft]

So from that.. it sounds like the RAM-B-231 bar mount will work.

I need to know because I'm flying out to pick up a FJR and plan to use my GPS to get home. I need to order the mount and I'll add it when I pick it up.

Thanks

 

[jgrover]

So from that.. it sounds like the RAM-B-231 bar mount will work.
I need to know because I'm flying out to pick up a FJR and plan to use my GPS to get home. I need to order the mount and I'll add it when I pick it up.

Thanks

This is the one I am using between the left hand grip and clutch controls... I had to move the clutch controls over a hair to make room...

https://products.ram-mount.com/rammount/pro...er=RAM-B-309-1U

Jason

 

[Brain Surgeon]

James,

I mounted my Garmin 550 using this techmount. Works well and looks good. https://www.techmounts.com/products/index.p...mp;product_id=7

Brain surgeon

 

[HartClimbs]

So from that.. it sounds like the RAM-B-231 bar mount will work.
I need to know because I'm flying out to pick up a FJR and plan to use my GPS to get home. I need to order the mount and I'll add it when I pick it up.

Thanks

I just used the empty threaded hole next to the clutch. A RAM-ball fit there perfectly and I mounted my 2610 on it.

Works like a champ.

 

[Knifemaker]

Did you see this post:

https://tinyurl.com/68c673

Or this one:

https://tinyurl.com/6yzt2z

Or this one:

https://tinyurl.com/69d8rb

and one you should have saved:

https://tinyurl.com/6q3x6y



KM

 

[mmonroe]

I looked through all of the below and didnt see a picture of the setup that Sockmonkey describes. I may have missed it though.

Mark

Did you see this post:
https://tinyurl.com/68c673

Or this one:

https://tinyurl.com/6yzt2z

Or this one:

https://tinyurl.com/69d8rb

and one you should have saved:

https://tinyurl.com/6q3x6y



KM