fjr mississippi
Well-known member
I have an MC CRUISE installed on an 07. The problem is that after a battery change the indicator light on the cruise control just flashes between red & green and will not engage. Anyone else have this problem?
MC CRUISE
- Thread starter fjr mississippi
- Start date
Help Support Yamaha FJR Motorcycle Forum:
Did you tap the brakes before trying to engage?
Steel_Gin
Well-known member
Same question as mophead.
I installed mine a month ago and mine does the samething when I first turn it on. You have to hit the brake, I believe it resets the servo and the light then is a steady red. If that doesn't happen when you touch the front or back brake my guess is a short someplace, connection maybe, with the cruise brake sensor wire. Or maybe your rear brake lever is hung a little bit and needs a good cleaning and lube. The cruise computer might need to see not only the press but the release of the brake as well.
fjr mississippi
Well-known member
Thanks for the help guys. I got in touch with MCcruise and we traced it down to a loose ground.
Those guys are quick to help. Some of the best customer service around!
