RedRiderMN

Well I'm not sure which of the combinations mentioned in the sale thread I would fit into, but I received a used Russell Day Long...

I think the usual seat height set up is both frt and rr on the same setting. The bottom of the seat should be parallel with the top of...

The paint on a 2014 (US model) is three parts: basecoat (grey color), top coat (red color), and clear coat (no color). If you are...

Under the seat is a sticker with date, name and order/seat number. You can write RDL and they will reply with the specifics of the build.

...or simply use an alligator clip with a weak enough spring so it doesn't bend the pins... Or a test lead with clips on both ends.

https://touchupdirect.com/touch-up-paint/yamaha/fjr1300/#pf-year=2014

Once you get it all sorted, you can do a PM on all that once a year and extend their useful life nearly indefinitely. Flushing the...

A photo of the damaged parts would be useful. I've used a soldering iron with a clean tip to "weld" the broke pieces together. Pretty...

@kebo123 Very nicely done! I've been considering such a system and was wondering how to install the rear sensor. Very clever. And...

And final result - without NAV: With NAV: I tested it on short ride and all works as advertised. System detected vehicles...

No doubt it sucks. We have all been there with some bike or car or boat, etc. Sentimental value is moreso what we are talking about...

Thanks for the kind words and advice everyone. I got home with the bike just a bit ago and all was well. Owner said he’d never seen...

I made a simple luggage rack that attaches to the Givi SR357 frame. I think a lot of hard top boxes overwhelm the appearance of the...

I will say that the pucks on the R-Gaza bars are a great place for jackstands

OOPS, I guess I will only upgrading one side this time around! Thanks Dan C. for the correction! :rolleyes: And to answer your...