Search results

In light of my recent thermostat and radiator woes, I found this stuff online https://muggyweld.com/alloy-5/super-alloy-5-starter-kit-3-32 Has anyone had any experience with this? The video of the application looks fantastic but looks can be deceiving. $60 is a whole lot better than $350 for a...

Been absent from this place for quite some time.....:-( Work just seems to always get in the way....that and we bought a travel trailer.....but I digress. So I started it up the beast the other day (after it sat for over two months....long winter) and I noticed steam rising from around the...

Some of you may remember the Uppercan400 Moto Rally I organized this year (and the year before). One of the benefactors of this rally is Walk It Off. This is a Spinal Cord injury recovery center start up which Kevin and Heather initiated. (Kevin is the reason I organized this rally) They have...

Having never officially attended an FJR rally before, I wasn't sure what to expect, but I knew the NERDS event was going to be memorable..... :clapping: However, I was completely unprepared for what I was to witness. :blink: I was standing outside at the Commodores Inn talking to a few...

It all began months ago when the CFR date was announced. Hopewell rocks was one thing I had always wanted to see and it looked like this would be the perfect opportunity. My plans came together once I managed to procure a riding buddy who would be interested in coming along. I was really excited...

So I'm riding along I 90east of 290 south of worcester mass when a damn 4X4 (wood) piece.......6 feet long fallsoff a truck and I nail it. rim is dented tire flat.......unridable......anyone in the area have a non abs front rim? and a truck??? If you can help Call me at 905-320-6374 Matt

home now :(

So I needed a new brake lever as I noticed mine had a small crack around the bushing where the bolt drops through, and after searching around I found these levers on Evil Bay Price was right, but I have been stung before, so I was a bit apprehensive. Anyways, I buy a set and they literally show...

Now that the bike is running I thought I would do a TBS. As I was doing it, the idle kept creeping up (over 1500). I had to shut cyl 1&2 and make the adjustment to 3&4 to balance in order to keep the idle down to 1200. but that's the lowest I could get it. I checked for leaks....etc......any...

Some of you might remember my post and photos last fall when I stripped the bike down to the bare frame (I was bored, and yes Canadian winters suck!!). I thought it would be easier to check the valves and replace the CCT...........clean and lube.....everything...etc... Anyhooo, I began...

I installed a tapered bearing set two years ago. This winter, I stripped the bike down (literally) to the bare frame to take care of maintenance (lubrication, CCT, valve shims, shock replaced, new fluids everywhere).......but I digress. I have re-installed the triple clamps and torqued the...

If you do, what would you be willing to take for it........and if you are in the USA, will you ship USPS to Canada?? Thanks in advance...... Mattster

Had a good laugh over this one when I first saw it on the

Looking for a 177 - 178. Thanks in advance.

This is cylinders 2 and 4.....others look the same. Engine has 104,000 Kms. Normal carbon deposits?? Cylinder 3 Cylinder 1 Cylinders 1&2 Cylinders 3&4

Absolutely something....... partial list of things needed thus far... CCT Valve Shims Rear shock Stock from any year Fuse block

Pulled my motor...............I was bored. Anyways, thought I'd do a valve clearance check (104K - kms) Last one was at 57K and they were at the limit.......now.....a bit over SHIM LIST ADDED

I've been experiencing a sticky front brake over the last few weeks. I thought it was just the lever so I greased it and made sure the bolt was not over tight......yet no change. My next thought is the master cylinder. It feels like stiction I've never had this happen but anything is possible...

I'm heading down in two weeks with the SO, and am working on planning rides. Aside from the usual routes west of Gatlinburg (Dragon, Cherohala, etc) I noticed the 107 (Round Mountain rd) and the 209 which runs up into Hot Springs. Anyone from the area have some advice on either of these?? or...

Heading to Gatlinburg in 2 weeks for some fun in the twisties and need to order a new front (still have a good rear and another wheel with a CT). I was wondering if anyone knows where a good deal on a PR2 (or other...) can be had. Anyone know??? Thanks in advance mattster