Powerman
Well-known member
Can't get a ground signal from the ECU to fuel pump relay 78 coil on the blue wire with a yellow tracer? Have continuity from relay to ECU on wire.
Just figured out the diagnostics, display shows a engine trouble light. Lean angle sensor code 08 says 5v, but I drove into the garage on two wheels.
Won't reset. Where is the lean angle sensor?
ECU and relay parts run in another bike.
Short the low side of the fuel pump relay coil and bike starts.
At EOM I had an intermittent engine cutout problem, second or so.
Took all the connectors loose and cleaned, and added ground spider wires. Removed all the extra grounds, but no workee?
Just figured out the diagnostics, display shows a engine trouble light. Lean angle sensor code 08 says 5v, but I drove into the garage on two wheels.
Won't reset. Where is the lean angle sensor?
ECU and relay parts run in another bike.
Short the low side of the fuel pump relay coil and bike starts.
At EOM I had an intermittent engine cutout problem, second or so.
Took all the connectors loose and cleaned, and added ground spider wires. Removed all the extra grounds, but no workee?
Last edited by a moderator: