** Cruise Control is sold ** First up, a complete CCS-100 cruise control set bought from another forum member. Purchased for second FJR, second FJR already had CCS-100 installed, so this kit not needed. Also includes a nifty control panel bracket that puts the control panel right above the engine kill switch. Also includes extra vacuum reservoir. $100 plus shipping.
https://flic.kr/p/21SztH7
Next up a HARD transmitter and receiver for a V1 radar detector. I velcroed the transmitter on the side of the V1 and velcroed the receiver to the back of my helmet. You snake the LED up near your visor opening so you can see the flashing in the day time. For night time I tuck it up a little higher with my middle finger (my technique). One of the two wires going to the LED is broken. It is very close the the plastic housing of the LED so you'd have to open up that housing with a Dremel OR affix your own LED and just splice it on. Everything in this system works, but need a minor repair on the LED (see picture). You can also buy an entire receiver with LED brand new from radarbusters for around $100. Whole set retails for $169 plus shipping. New Price $50 shipped lower 48.
https://flic.kr/p/ZyYSHD
Last is a like new Russell Day Long in full leather. I have another old, worn RDL that is looking ragged, so no need for something this nice. There is a slot for a driver's back rest, but that is not included (can order from Russell). I do not have the specs for this particular seat. I will tell you it sits about 1 inch taller than my other one. The padding and foam are very full--it is very comfortable. I test road it for 1000 miles and if anything like it better than my very worn RDL that seems to sag a bit. I am 5'11 and 210 lbs. You will not be disappointed in the comfort (unless you are vertically challenged).
https://flic.kr/p/ZPZGNL
https://flic.kr/p/GYNR16
Dont forget with Russell pricing you have to send in seat pans.
So, $450 plus send me a front and pillion seat (can be stock or some other brand, don't care too much--no rips/tears).
OR $525 plus send me driver's seat OR $650 and I'll find my own seats.
https://flic.kr/p/21SztH7
Next up a HARD transmitter and receiver for a V1 radar detector. I velcroed the transmitter on the side of the V1 and velcroed the receiver to the back of my helmet. You snake the LED up near your visor opening so you can see the flashing in the day time. For night time I tuck it up a little higher with my middle finger (my technique). One of the two wires going to the LED is broken. It is very close the the plastic housing of the LED so you'd have to open up that housing with a Dremel OR affix your own LED and just splice it on. Everything in this system works, but need a minor repair on the LED (see picture). You can also buy an entire receiver with LED brand new from radarbusters for around $100. Whole set retails for $169 plus shipping. New Price $50 shipped lower 48.
https://flic.kr/p/ZyYSHD
Last is a like new Russell Day Long in full leather. I have another old, worn RDL that is looking ragged, so no need for something this nice. There is a slot for a driver's back rest, but that is not included (can order from Russell). I do not have the specs for this particular seat. I will tell you it sits about 1 inch taller than my other one. The padding and foam are very full--it is very comfortable. I test road it for 1000 miles and if anything like it better than my very worn RDL that seems to sag a bit. I am 5'11 and 210 lbs. You will not be disappointed in the comfort (unless you are vertically challenged).
https://flic.kr/p/ZPZGNL
https://flic.kr/p/GYNR16
Dont forget with Russell pricing you have to send in seat pans.
So, $450 plus send me a front and pillion seat (can be stock or some other brand, don't care too much--no rips/tears).
OR $525 plus send me driver's seat OR $650 and I'll find my own seats.
Last edited by a moderator:
