garyahouse
newbs need the forum
Thought you might like to see my windshield project. I thought about doing something like this on the side of the fairing, but decided to try the windshield instead. Hard to get a pic of the finished project on the bike, but here's a quick shot:
First, I downloaded an FJR logo from the net
Then I blew it up, cut it out, and taped it on the outside of the windshield
Then, using an old roll of gold pin stripe tape I had laying around for like 20 years, I carefully coerced it onto the inside of the windshield. I trimmed it off with a razor blade being careful not to hack up the windshield, I used a pair of tweezers to help remove the excess after trimming. Thank God for the pair of 400 magnification glasses I picked up at the drug store. The old eyes ain't what they used to be. Even so, I still needed the good old magnifying glass for a few areas.
Remove the paper outline
Hold it up and show it off so you can see it...
And mount on the Feejer:
For what it's worth, if anybody wants the logo, all cut out and ready to "trace," let me know and I'll fold it up and send it to you.
Gary
darksider #44
First, I downloaded an FJR logo from the net
Then I blew it up, cut it out, and taped it on the outside of the windshield
Then, using an old roll of gold pin stripe tape I had laying around for like 20 years, I carefully coerced it onto the inside of the windshield. I trimmed it off with a razor blade being careful not to hack up the windshield, I used a pair of tweezers to help remove the excess after trimming. Thank God for the pair of 400 magnification glasses I picked up at the drug store. The old eyes ain't what they used to be. Even so, I still needed the good old magnifying glass for a few areas.
Remove the paper outline
Hold it up and show it off so you can see it...
And mount on the Feejer:
For what it's worth, if anybody wants the logo, all cut out and ready to "trace," let me know and I'll fold it up and send it to you.
Gary
darksider #44
Last edited by a moderator:
