jasona1700
Active member
Well, finally set aside a day today, and installed the AVCC. I've done so much research on this project, but I haven't seen this project just yet. (Quick side note..for those interested in this project, I've saved all the pages on this site to "My Favorites"on my laptop and plan to post the links for a one-stop-shop on AVCC installs and troubleshooting)
A quick background: Didn't feel like messing with removal of the water pipe, so I mounted the servo under the seat. Also, used the 2 switch setup that can be seen here https://www.fjrforum.com/forum//index.php?s...amp;#entry16030 to replace the control box.
All wiring is as those before me have done. I used the orange wire for the coil pickup. I get a blinking light at idol on the servo, so I assume the coil wire is good.
Here's the problem:
The bike idles anywhere from 1500-2500rpm. AND the AVCC doesn’t seem to set. I'm too frustrated today to continue to troubleshoot. The beaded chain didn't seem to bind, so I don't think it's an issue of a mechanical hang-up. I know there's good vacuum, as when I pulled the tubing from the servo, it sounded like a soda can opening.
Any ideas for what will probably be a day of troubleshooting??
Thanks in advance!
A quick background: Didn't feel like messing with removal of the water pipe, so I mounted the servo under the seat. Also, used the 2 switch setup that can be seen here https://www.fjrforum.com/forum//index.php?s...amp;#entry16030 to replace the control box.
All wiring is as those before me have done. I used the orange wire for the coil pickup. I get a blinking light at idol on the servo, so I assume the coil wire is good.
Here's the problem:
The bike idles anywhere from 1500-2500rpm. AND the AVCC doesn’t seem to set. I'm too frustrated today to continue to troubleshoot. The beaded chain didn't seem to bind, so I don't think it's an issue of a mechanical hang-up. I know there's good vacuum, as when I pulled the tubing from the servo, it sounded like a soda can opening.
Any ideas for what will probably be a day of troubleshooting??
Thanks in advance!