A DR650 Ride Report

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Fontanaman

Robin Trower
Joined
Oct 29, 2009
Messages
2,007
Reaction score
1,060
Location
Spokane, Wa
I choose Saturday July 21st as my first ride on the DR650 I bought last week. The primary goal was Stocking Meadows a remote place in north central Idaho. It is so darn remote Google Maps as no images. Very odd.

How did I choose Stocking Meadows? Well I whipped out my Benchmark Maps Idaho Road and Recreation Atlas and on page 33 there it was. I like high mountain meadows they are very scenic.

So I laid in an ambitious route and had 3 bail out points. I brought tools to fix a flat and Camelback with water and some food. I even brought my FJR hat but forgot to get it out for a photo.

Here is the route. The magenta is the planned route while the green are the deviations from the plan.

9SCGw4w.jpg


I ride I-90 to Wallace Idaho a distance of 80 miles or so. The little DR was willing. For some reason the song Willin' as sung by Linda Ronstadt comes to mind. Man she sure could sing, what a voice. The ride to Wallace was just fine. I was doing about 63 mph and DR was happy. So was I. Just slow down and enjoy life. No hurries. I am retired.

I gas up in Wallace and found the gravel road south of town. I stop for this photo op of the first time on gravel with my new toy.

vRnxf0A.jpg


QDZPSeu.jpg


pG4brdZ.jpg


Inspired by Pants.

bsXvtZt.jpg


So the first 5 miles are like this. Nice and easy. The handlebars rock a bit back and forth and the DR skitters down the road.

QMVYe8q.jpg


It was supposed to be like this most of the way to Avery but the Zumo decides the shorted distance is a 4x4 high clearance road. Now I am up on the pegs on a goat trail. I am in first and second gear. The DR has some torque and handles this junk very well. It has more capability and your truly.

I follow this for about 1.5 miles before turning around and when I do the crazy Zumo reroutes me to the way I wanted to go in the first place.

Here are a couple of photos of the goat trail.

ZiGjz3T.jpg


Technical riding for sure. Talk about getting some experience with the new bike quickly.

iwcUgEB.jpg


Back on the easy peasy super highway things get back to normal.

0ZAXbZt.jpg


On the way to Avery Idaho there was about three of these. I get a splash of gas in Avery Montana.

dHsGtHN.jpg


After leaving Avery I was about to get a surprise. The Benchmark Maps have two definitions for gravel roads. Unpaved road and High Clearance 4WD road. A small dark red line defines one while the other is a red thin line. It is nearly impossible to see which is which. So I choose a route that had a lot of High Clearance 4 WD. About 15 miles in it goes from easy peasy to up on the pegs. My street riding boots don't have a thick enough sole. Note to self - need some dirt riding boots with a good thick sole for stand up work.

Typical High Clearance 4WD road. In the photos you can see a 4 wheeler. There were lots of this out here. I was not alone.

AzSLobm.jpg


And it was scenic.

8VsqSOq.jpg


v0S1MLd.jpg


But this was wearing me out. Somehow I missed a turn and the Zumo rerouted me or who know. I was on the Stocking Meadows road then took a right to the Fishhook Gold Road - wrong choice. I figured out what happened at home and have turned off auto recalculate. A didn't get to Stocking Meadows but there will be other days.

Anyway it was all good. I click on the GPS button go home getting a response you will be home in two hours at 5:00pm. I say yes please. The last insult of the gravel road was the last 2 miles or so. Road crews had applied 6 or 8 inch layer of basalt 1/2 crush gravel. Had to stand on the pegs to navigate this junk then it was pavement.

So what did I learn? I looked carefully at the map to find a lot of the non paved roads in Idaho are High Clearance. I will need knob tires to be safe. Th DR has Warp 9 one inch handle bar risers and my hands are higher than my elbows so my wrists got sore at 175 miles. The bars were about right standing but I can work with bars an inch lower. Next ergo issue is the seat. It was good for 175 miles. A Russell is in my future and I want it one inch higher or a bit more to get over the handle bars and provides some additional space between the seat and the pegs. Anybody interested in a Sargent seat?

I road about 225 miles on a shakedown ride. Not bad for a retired old man. I had zero bobbles had a good day and learned a lot.

 
I am so damned jealous. But I am getting there...

I bet your DOT knobbies are better than the Bridgestone Trail (Death) Wings that originally came on your bike. Mine seem to grip pavement okay but nothing else really.

I am INTERESTED in that Sargent Seat. I will need something to use if I send my pan off to get Customized.

 
Nice shakedown run Fontanaman!

My friend...before you go and get too adventurous find a riding buddy for those off-highway excursions. We're not as young as we think we are!

~G
I appreciate your concern --G. It is why I went out on a Saturday. There were lots of people out there. All of them friendly. One fellow gave me a thumbs up and asked a question. I turned off the music and drove up to talk with him. We had a nice chat. Also I have a Personal Locator Beacon in case I screw up. I also gave Linda a map and showed here where I was going, she also had my Spotwalla url.

I'd like to have a riding partner but it will take time. I may get a Spot because the Spotwalla depends on phone service. Lastly I was riding like a slug. At times I was saying easy as you go Jim thinking of Don Stanley. I used to ride a DR250 dirt only bike. This 650 is about the same just 100 lbs heavier with wads of torque.

Oh one more thing. This is adventurous as I want to get. I did turn around on this ride when it seemed I was on the wrong road and didn't want to get in a pickle on a difficult road.

 
Last edited by a moderator:
Top