smitty141
My name is Smitty.. And I have a motorcycle proble
Hi everyone... I scored a set the other day from a forum member. Does everyone have theres yet, just wondering....
Warchild did a install and is on the FJR tech web site. I did find a easy way to flip the igniters. I think Dale used a small file are grinder. This stuff is like bakelight type plastic and breaks easy. I used my soldering iron to melt a notch in the plactic. Then you are able to run the wires out the other side. I still have to finish up the wiring, an hour or less it will be complete.
I was able to stack the ballasts on the left side on top of the headlight. I used velcro on the one that sits right on top of the headlight. I had to cut the tabs of on the second one and use a small piece of velcro and a zip tie to hold it in place. You just want to be careful not to let the windshield motor hit it when it goes up/down. Here's some pic's... Smitty
Warchild did a install and is on the FJR tech web site. I did find a easy way to flip the igniters. I think Dale used a small file are grinder. This stuff is like bakelight type plastic and breaks easy. I used my soldering iron to melt a notch in the plactic. Then you are able to run the wires out the other side. I still have to finish up the wiring, an hour or less it will be complete.
I was able to stack the ballasts on the left side on top of the headlight. I used velcro on the one that sits right on top of the headlight. I had to cut the tabs of on the second one and use a small piece of velcro and a zip tie to hold it in place. You just want to be careful not to let the windshield motor hit it when it goes up/down. Here's some pic's... Smitty
![IMG_0481.jpg](https://proxy.imagearchive.com/871/8716d5192f0c2d6b9dac25e835869a85.jpg)
![IMG_0483.jpg](https://proxy.imagearchive.com/afb/afb05f2ac73c34162d6a75ea60439332.jpg)
![IMG_0482.jpg](https://proxy.imagearchive.com/4b0/4b06e8831eeec9c7413966f43af7929f.jpg)
![IMG_0484.jpg](https://proxy.imagearchive.com/ae0/ae0aa1d3b3b80915bfd3050568787c17.jpg)